8 PAR CAN 64 LED PAR64 C-Clamp Stand XLR25 Controller LED1870

25 foot XLR extension cable. Male 3 pin XLR to female 3 pin XLR,XLR

Ideal for portable light shows, this sturdy, easy-to-setup trussing system comes complete with two black anodized aluminum tripods that telescope to nine feet. Also included are two five-foot truss I-beams that lock together to create a 10-foot span. Comes with two T-bars for use with or without the truss. The LTS31 may also be used to fly lightweight speaker cabinets overhead for better high-frequency coverage.

Optima Professional LTS31 Parts:

- 2 x T-Bars
- 4 x Side Mount T-Collars
- 1 x Center "I" Support Bar
- 2 x Center Posts for Tri-Pod Stands
- 2 x 5' Truss I-Beam Sections w/Spigot
- 2 x 9' Tri-Pod Stands
- 6 x Safety Pins
- 1 Hexagon Allen Wrench (Inserted in 5' Truss End)

Specifications:

- Aluminum Diameter: 1 1/2"

PAR64 Black LED Specification

The PAR 64 LED is a DMX-512 controllable, full RGB color mix par can made up of highly efficient and double-sized bright LED's. All red, green and blue LED's can be controlled separately allowing the creation of an unlimited range of colors.
The PAR 64 LED can operate in Stand-Alone, Master/Slave and via DMX-512 control utilizing 5 DMX channels.

FEATURES

- Built-in automated programs via master/slave

- Built-in sound activated programs via master/slave

- Ultra bright and ultra large LED's (10mm)

- High Quality Lightweight Professional Aluminum Par 64 CAN with Double-bracket yoke

- Perfect for Mobile, Club, Stage and Architectural applications

- Easy to setup and use


LEDs ADVANTAGE:

- Save Energy

- No Lamp Replacement needed!

- Unlimited Colors - No gel Sheets

- No heat

- Fully DMX

- Light weight


Technical Information:

- Light Source: Red: 61 LEDs, Green: 61 LEDs, Blue: 61 LEDs
- Beam Angle: 25°

- Total Output power: 12W

- Control modes: DMX, Auto, Sound, M/S (Linking)

- Channel function:

Channel 1: Red intensity

Channel 2: Green intensity

Channel 3: Blue intensity

Channel 4: Dimmer

Channel 5: Strobe Speed

- Built-in programs: Single color, multi-colors, rainbow, variable strobe

PAR LED-C is a RGB LED controller featured with color chase, and fades of RGB LED, and operated via DMX, sound active, etc. that will provide you splendid vision enjoyment.

This controller not have the ability to control each unit individually - control all units at the same time.

Features:

- Blackout- Disables or enables all channel outputs.
- FULL ON - All LEDs on.
- SOUND ACTIVE - Activates Sound Active mode. Chase mode must be active for Sound Active to work.
- MASTER FADE - to control the dimming and strobe effect.
- SPEED/FADE TIME FADE - adjust the speed of the chaser or the fade time of a program.
- CHASE/COLOR MIX FADE - choose your chase or color mix.
- COLOR MIX BUTTON - activate the Color mix programs. Use the Chase/Color Mix fade to select one of 32 Color mixes.
- CHASE BUTTON - activate the Chase programs. Use the Chase/Color Mix fade to select one of 12 chases.
- HOLD BUTTON - use to hold one of nine colors.
- COLOR SELECT BUTTONS - Select one of the nine colors. Hold must be selected for Color Select to work.


Specifications:

- DMX Output: 3Pin female XLR